ZENEO Self-aligning ball bearings

Outer ring raceway curvature center and bearing center line, and therefore have a self-aligning ball bearing with the same self-aligning feature. In the shaft, deflection occurs when the shell can be automatically adjusted without increasing the burden bearing. Spherical roller bearings can bear radial load and axial load in two directions. Radial load capacity, suitable for a heavy load, impact load conditions. Inner diameter is tapered bore bearings can be installed directly. Or use the adapter sleeve, remove tube installed in the cylinder axis. Cage with steel stamping cage, forming polyamide cage and copper alloy machined cage. [1]
Aligning ball bearings have a cylindrical and tapered bore two structures, cage made of steel sheet, synthetic resin. It features an outer ring raceway spherical shape, with auto-Mind, can compensate for misalignment and shaft deflection made aligning ball bearings into the error, but the inner and outer rings relative inclination of not more than 3 degrees.
Can withstand greater radial load, but also can withstand a certain degree of axial load. This kind of bearing outer ring raceway is spherical shape, aligning it with the performance, when the axial force leaving the inner bend or tilt relative to the centerline of the centerline of the outer ring tilt does not exceed 1 ° ~ 2.5 °, the bearing can still work .
Aligning ball bearings are cylindrical and conical bore two kinds. Conical taper bore 1: 12 or 1:30. In order to enhance the lubrication properties of the bearing, machining annular grooves and three hole on the bearing outer ring.
Aligning ball bearings Product Features

The main radial load, and can withstand a small axial load. (Shell) of the axial displacement limit the clearance limits, with self-aligning performance, allowing the inner peripheral conditions relatively little inclination to work for bearing seat hole can not guarantee strict concentricity of the parts.
Aligning ball bearing structure in the form of

Aligning ball bearing assembly with a dust cover and with a ring has filled the right amount of grease should not be heated before installation do not have to clean, use the process without re-lubrication, to adapt to operating temperature - 30 ℃ to + 120 ℃ between. Aligning ball bearings main purposes: for precision instruments, low noise motors, automobiles, motorcycles and general machinery, the machinery industry, the most widely used class bearings
Structure Classification Edit
Bearings

Mini-series: 10x, 12x, 13x
General Series: 12xx, 13xx, 22xx, 23xx
Similar products

1, Sweden, SKF self-aligning ball bearing Seiko Swiss axis
2, Germany FAG-aligning ball bearing Seiko Swiss axis
3, Japan NIN-aligning ball bearings with Seiko Swiss shaft