Bearing unloading method and attention problems

1. Demolition of the bearing requires oil experienced personnel or under its knowledge.
     2. Before starting disassembly, determine the specific method of disassembly.
     3. Prepare the necessary bearing unloading tool at hand.
     4. When reusing or inspecting the removed bearings, be careful not to scratch or damage the bearing raceways or rolling elements.
     When removing the bearing from the bearing seat, the removal force shall be applied to the outer ring.
     When removing the bearing from the shaft, the removal force shall be applied to the inner ring.
     The main method of removing bearings.
     Use hand or hydraulic, use a special wrench, use the pull, the use of induction heating equipment (inner ring), the use of oil
     Be sure to check whether the demolition work has cracks, sharp edges, breakage, debris or deformation.