Heat conducting oil pump characteristics and the front bearing assembly

Conducting oil pump, the temperature is higher oil delivery pump, centrifuged, screw and gear, if the construction of the pump, the screw can be divided into single screw, twin screw and three screw. Gear pumps can be divided into internal and external gear pump gear pump, generally used for transporting low viscosity oils. Centrifugal pumps are the pump casing and impeller configuration, various types of pumps are of this kind, use is quite extensive. Centrifugal, screw, gear type differences are as follows: First, from the principle of the pump can be divided into displacement pumps and rotary pumps. They have advantages and disadvantages, suitable for conveying different liquid substance. (

1), a positive displacement pump is due to the volume change of the pump to achieve transmission fluid: If screw and gear pump;
(2), rotary pump is a rotary pump wheel drive because the liquid to achieve delivery: as centrifugal pumps, its liquid quality requirements are less stringent. HTF pump types currently available in the market can be described as a wide range. So in conducting oil pump selection should pay attention to its features, functionality and practicality.
RY series of air-cooled high temperature
Conducting oil pump is one of the main products Haitan Pump Co., Ltd. Yongjia County, which is made of steel, according to customer requirements can also be made of stainless steel, also known as conducting oil pump, heat conducting oil pump, cast steel thermal oil pumps, oil circulation pumps, air-cooled heat pumps, centrifugal heat pump,
RY heat pumps, heat pumps, high temperature hot oil circulation pump is a centrifugal pump, also known as high-temperature pump, hot oil circulating pump, is an ideal hot oil circulating pump or for heat carrier pump, heat exchange the device ideal complementary pump. Air-cooled heat-conducting oil pump extensive use and promotion of good performance and advantages in different industries conducting oil pump in the industry to promote the application of use in different environments. Air-cooled heat conducting oil pump has good advantages and features use of advanced technology for production, the following brief the pump process and advantages:
(1) heat conducting oil pump from the heat radiating structure, changed the traditional water cooling structure, the structure is simple, small size, operating cost savings, performance, reliable, is the digestion and absorption of foreign oil pump developed on the basis of a second generation product, the basic structure in the form of single-stage single-suction cantilever foot support structure;
 (2) Import heat conducting oil pump is axial suction outlet center vertically upward, and motor mounted on the same base.
(3) heat conducting oil pump support structure takes the form of double-end ball bearings, front-end lubricating oil, the back-end with grease lubrication, the middle of a guide tubing, to always observe the seals and recycling HTF.
(4) RY-type heat conducting oil pump packing seal and mechanical seal combination in the form filler sealed with high temperature resistant filler, good thermal adaptability, and the mechanical seal is made of high mechanical strength, good wear resistance hard quality alloy material to ensure the sealing performance under high temperature conditions.
 (5) RY-type heat conducting oil pump imported polytetrafluoroethylene (abbreviated PTFE) to do lip seal, the sealing performance produced a leap than rubber-based sealing reliability increased by 25 times, highly corrosion-resistant.
 RY conducting oil pump (RY centrifugal pump HTF) has been widely used in various industries:
1, the oil and chemical industry: polymerization, condensation, distillation, rectification, melting and so on:
2, plastic and rubber industry: pressing, rolling, extrusion, vulcanization molding, etc;
3, the textile industry: heat setting, drying, hot melt dyeing
4, the oil industry: fatty acid distillation, oil decomposition, esterification and the like;
5, the construction industry: asphalt heating. ;
6, the paper industry: drying, corrugated paper processing.
7, the synthetic fiber industry: melt polymerization, spinning, extending the like;
8, the timber industry: more plywood, fiber compression molding, wood drying and the like;