ZENEO Needle roller bearings

(1), closed Needle roller bearings (2), needle bearing inner ring (3) and non-needle bearing inner ring / no cage needle roller bearings without inner ring (4) with holder and no cage filled with needle bearings (5) SKF can also supply all types of needle roller bearings, 1, needle roller cage assembly 2, needle roller bearings without ribs 3, 4 self-aligning, combined needle roller / ball bearing 5, combined needle roller / axial ball bearings 6, combined needle roller / cylindrical roller thrust bearings
STO outer ring without ribs, roller bearing inner ring
RNA22 ... 2RS double sealed, no inner roller bearing
NA22 ... 2RS double sealed, roller bearing inner ring
NATR
NATR ... PP flat ring axial guide roller bearing
Needle roller bearings
Needle roller bearings (9)
NATV
NATV ... PP flat ring axial guide roller bearing, full needle
NUTR guide roller bearing rolling elements, full roller type
CRY inch flat ring axial guide roller bearing
Drawn Cup

Needle roller bearings with a thin needle roller bearings stamping outer ring. Its main feature is the low sectional height and bear higher load capacity. Mainly used for compact, inexpensive and not as a needle bearing inside the hole cage assembly raceway bearing configuration. Bearings and bearing housings shall install an interference fit. If it can save me axial positioning shoulder, retaining ring, and other functions, then the bearings inside the hole can be made very simple and economical.
Mounted on the shaft end Needle roller bearings have open bilateral and unilateral closed. Drawn cup base closed end surface can withstand small axial guiding force.
Needle roller bearings are generally not attached to the inner ring. In the journal can not be hardened and ground situation, you can use the table listed in the inner ring.
Needle roller bearings hardened steel outer ring and needle roller cage assemblies can not be separated. Lubricant storage free space can be extended to add lubrication interval. Bearings generally use single design. Except wide specification bearings 1522,1622,2030,2538 and 3038 series, which is equipped with two needle roller cage assemblies. Bearing outer ring with lubrication holes. According to user needs, the shaft diameter greater than or equal to all single 7mm Needle roller bearings can be equipped with lubrication holes in the outer ring (code suffix AS1).
Needle roller bearings with seals
The seal can not be installed due to space constraints of the occasion, it can provide an open-ended or closed end Needle roller bearings with seals (3-5). Such equipment bearing polyurethane or synthetic rubber friction seal, wherein the lithium base grease filling good antirust properties, suitable operating temperature -20 to + 100 ℃.
A seal bearing inner ring is wider than the outer ring 1mm, this is the bearing in the machine axis relative to the displacement of the bearing box with a little work but also to ensure good seal and prevent injury bearing contamination. Bearing inner ring lubrication holes are also, according to the needs of the bearing arrangement, the outer or inner supplementary lubrication.
Classification
1. Radial needle roller and cage assembly
2. NA, NKI-type needle roller bearings
3. RNA, NK-type needle roller bearings without inner ring
4. HK drawn cup needle roller bearings
5. BK drawn cup needle roller bearings
English Model
Metric Series: HK, BK, F, FH, FY, MF, MFH, MFY; TA..Z, TLA..Z, TAM, TLAM, YT, YTL.
Inch Series: SCE, BCE, SCH, BCH, SN, B, BH, M, MH,; BA ... Z, BHA ... Z, BAM, BHAM, YB, YBH. Example: In HK XX YY XX inscribed circle diameter Model height YY
RS ------ is a ring with the metric system
2RS ----- for two seals, with the metric system
P ------- is a ring, with imperial system
PP ------ for two seals, with imperial system
ASI / OH --- for the hole HK, BA, TA..Z-- perforation drawn cup needle roller bearings
BK, TAM, TLAM-- Sealed drawn cup needle roller bearings
F-- full perforation drawn cup needle roller bearings
FY, YT-- full perforation drawn cup needle roller bearings (grease limit)
FH, YTL-- full perforation drawn cup needle roller bearings (heavy series)
MF-- Drawn cup full complement needle roller bearings
MFH-- Drawn cup full complement needle roller bearings
SCE-- Piercing drawn cup needle roller bearings
BCE-- Sealed drawn cup needle roller bearings
SCH-- Piercing drawn cup needle roller bearings
BCH-- Sealed drawn cup needle roller bearings
SN-- perforation drawn cup full complement needle roller bearings
B-- full perforation drawn cup needle roller bearings
BH-- perforation drawn cup full complement needle roller bearings (heavy series)
M-- Drawn cup full complement needle roller bearings
MH-- Drawn cup full complement needle roller bearings (heavy series)
Physical ring

Physical ring needle roller bearing is composed of one or two rings and needle roller set with cage components. Depending on the application, it can be divided into inner ring or without an inner ring of the bearing. Therefore, entities ring needle roller bearings to meet light weight, small footprint, deliver power requirements. Physical ring needle roller bearings with smaller size and higher load carrying capacity.